What makes the NUKATAP different among the older manufactured styles of taps on the market?
– First Pour Foam Reduction in Thermal Mass
– Generation 2 Over-molded Shuttle (O-Ringless Shuttle Piece with less thermal mass)
– Improved Laminar Flow
– Most Sanitary Forward Sealing Design Design
– Longer Life Seals
– Move Versatile Tap Handle Angle
– Certified NSF.
– ANSI Accredited
– SCC Accredited

The post Nukatap – SS appeared first on Brew Distill Ferment.

Features:
– Australian Standard Approved
– Hold 2.6kg of gas when full
Dimensions 47cm high x 14cm diameter
– Comes with included carry handle for easy of transport and protection of valve
– Will fit in Keg Master Series 2 and Series 3 Kegerators without reducing the number of kegs it can hold

Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense from a kegerator. If you are brewing and carbonating your own beer, without accounting for any wastage you should be able to carbonate and dispense about 200L or over 10 x 19L kegs. If you are purchasing commercial beer which is already carbonated you should be able to dispense about 400L or 8 x 50L kegs.

To prevent prematurely emptying your cylinder it is highly recommended to thoroughly check for leaks and preform a pressure check. Check out the video below to see how to do this.

These cylinders should never be operated inverted. The valve must always be upright. 

The post CO2 Gas Cylinder 2.6kg (full) appeared first on Brew Distill Ferment.

As of February 2019, Keg King 6 Kilo Gas Cylinders feature our new improved handle design that makes them easier to orient and/or remove. These new handles screw directly onto the metal threads that are manufactured on the cylinder top.

This 6kg cylinder is ideal if you’re carbonating and/or dispensing large amounts of beer or live far away from a filling station. Purchasing your own CO2 cylinder is generally cheaper than renting from a gas supplier for periods longer than 12 months.

Features:
– Australian Standard Approved
– Holds 6.0kg of gas when full
– Dimensions 75cm high x 16cm diameter
– Comes with included carry handle for easy of transport and protection of valve

Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense from a kegerator. If you are brewing and carbonating your own beer, without accounting for any wastage you should be able to carbonate and dispense about 500L or over 25 x 19L kegs. If you are purchasing commercial beer which is already carbonated you should be able to dispense about 1000L or 20 x 50L kegs.
These calculations are for use when the kegs are cold like a kegerator. If you are dispening the beer and the keg is at room temperature like with a jockey box you will need a higher dispense pressure and use more gas.

To prevent prematurely emptying your cylinder it is highly recommended to thoroughly check for leaks and preform a pressure check. Check out the video to see how to do this.

These cylinders should never be operated inverted. The valve must always be upright.

The post CO2 Gas Cylinder 6kg (full) appeared first on Brew Distill Ferment.

Chrome plated with stainless steel barb and internals. The barb it comes with suits standard 4mm-6mm beer line.

The post ABS Pluto Gun Barb appeared first on Brew Distill Ferment.

The post Intertap – Replacement Spout appeared first on Brew Distill Ferment.

The post Keg Lid O-Ring appeared first on Brew Distill Ferment.

The post 12.8mm SS Stepless Line Clamp appeared first on Brew Distill Ferment.

EVAFresh contains an inner barrier made from a proprietary polymer that provides excellent oxygen protection while preventing Co2 loss in your beverage.  Your beer will stay fresher for longer and not loose carbonation. With EVAFresh tubing you’ll be able to keep the freshness in your beer and beverages, even if the liquid has been sitting in the line between pours.

EVAFresh has an internal surface that is incredibly smooth while remaining almost entirely impermiable to oxygen.  This unique quality makes it extremely difficult for bacteria and other microbes establish inside EVAFresh tubing.

The outter barrier is made from EVA material that seals well when used push in fittings and is much easier to attach to barbed disconnects than our previous bevearge line. EVA outter barrier gives the tubing excellent flexibility so the line is far less likely to kink or crack when it is bent or coiled.

The post Keg Line 5mm x 8mm appeared first on Brew Distill Ferment.

EVAFresh contains an inner barrier made from a proprietary polymer that provides excellent oxygen protection while preventing Co2 loss in your beverage.  Your beer will stay fresher for longer and not loose carbonation. With EVAFresh tubing you’ll be able to keep the freshness in your beer and beverages, even if the liquid has been sitting in the line between pours.

EVAFresh has an internal surface that is incredibly smooth while remaining almost entirely impermiable to oxygen.  This unique quality makes it extremely difficult for bacteria and other microbes establish inside EVAFresh tubing.

The outter barrier is made from EVA material that seals well when used push in fittings and is much easier to attach to barbed disconnects than our previous bevearge line. EVA outter barrier gives the tubing excellent flexibility so the line is far less likely to kink or crack when it is bent or coiled.

The post Keg Line 4mm x 8mm appeared first on Brew Distill Ferment.

This 6.3mm size is not recommended for direct draw kegerators/keezer set ups as it  would require up to 8 meters of line per tap. For these types of keg systems, use EVAFresh 4mm or 5mm

EVAFresh contains an inner barrier made from a proprietary polymer that provides excellent oxygen protection while preventing Co2 loss in your beverage.  Your beer will stay fresher for longer and not loose carbonation. With EVAFresh tubing you’ll be able to keep the freshness in your beer and beverages, even if the liquid has been sitting in the line between pours.

EVAFresh has an internal surface that is incredibly smooth while remaining almost entirely impermiable to oxygen.  This unique quality makes it extremely difficult for bacteria and other microbes to establish inside EVAFresh tubing.

The outter barrier is made from EVA material that seals well when used push in fittings and is much easier to attach to barbed disconnects than our previous bevearge line. EVA outter barrier gives the tubing excellent flexibility so the line is far less likely to kink or crack when it is bent or coiled.
Pressure Rating (with 1.5safety factor) 30C – 1.4 MPa (200psi) 50C – 0.7MPa (100psi)

The post Keg Line 6.3mm 9.5mm appeared first on Brew Distill Ferment.

What is Oxebar Mono
Oxebar Mono is a PET polymer blend that utilises several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by x3. We recommend this product for beer stored in keg up to 6 months.

Dimensions
Diameter:155mm
Height: 520mm

The post 8L PCO38 PET Keg with Ball Lock Disconnect Tapping Head Kit appeared first on Brew Distill Ferment.

Keg King 19L Ball Lock Kegs are manufactured using a robotic orbital welding machine for percision accuracy and quality.

Constructed from food grade 304 Stainless Steel Keg King 19L Ball Lock Kegs are built in compliance with AS2971.

The superior finish on these kegs makes them sturdier and more reliable than the brushed finish on most economy kegs.

The black rubber on these kegs also make them a little nicer to use around your house as they are less likely to damage your tile floors or crack plastic lining inside your kegerator.

Keg King 19L Ball Lock Kegs are equipped with a handy stainless steel loop attached to the underside of the keg lid, making it easy to suspend and remove a hop bomb, flavour infuser or hop pouch within the keg for adding extra flavour to your beverage.

The post Keg – 19L Ball Lock appeared first on Brew Distill Ferment.

The post Intertap PC Tap with Handle appeared first on Brew Distill Ferment.

The post Bronco / Picnic Party Tap appeared first on Brew Distill Ferment.

The post Black Plastic Draft Tap Handle Slender appeared first on Brew Distill Ferment.

How to install Gas Duck Bill Valve
Remove black EPDM washer inside 1 of the duotight push in fittings that you will use for gas. The duck bill valve is a washer as well as a non-return check piece.
It is optional, you do not have to use the non-return check pieces for gas or liquid.

The post Keg Coupler S-Type (Heineken/Asahi) appeared first on Brew Distill Ferment.

The post 6mm Straight Barb Tail for (5/8 Hex Nut) appeared first on Brew Distill Ferment.

This size barb is ideally suited to tubing/hose that is 4-6mm ID.

The post 6mm Angle Barb Tail (for 5/8 Hex Nut) appeared first on Brew Distill Ferment.

These are a very common o-ring type and definitely handy to have a few spares.

The post Post O-Ring (for ball lock kegs) appeared first on Brew Distill Ferment.

The post Poppet O-ring appeared first on Brew Distill Ferment.

The post Nylon Regulator Washer appeared first on Brew Distill Ferment.

The MKX combines performance, reliability and affordability better than any other gas regulator on the market. 

Keg King’s Australian Engineering Team worked to improve the design of the older model MKIII Regulators that brewers and draft system operators have known and trusted for years.

The major new features of the MKX include:

NEW 70PSI Operation with the NEW Green 70PSI Pessure Relief Valve.

The new PRV allows for higher pressure processes and reliable pressure relief at 70PSI.

NEW output options.

Choose from a standard 6mm Barb Fitting or use the reliable DM Push-in Fitting. It’s up to you!

NEW more rugged, durable gauge protection on high and low pressure gauges.

MKX features our highly reliable Keg King Fully Encapsulated Seat Technology.

This means that the seat and seat cap assembly are manufactured as a fully encapsulated part, reducing the chance of contamination in the event that the regulator is opened for maintenance.

The seat and seat cap assembly utilsies the trusted material advantage of ultra-high molecular weight polyethylene (UHMWPE) which is significantly better in chemical resistance and stability compared to the plumber’s tape often used on other brand regulators. 

MKX regulators include double filtration: one one the gas input and a second sintered filter on the underside of the seat cap assembly to improve sanitary operation in beverage service.

Larger is Better!

MKX is made with high quality machined brass body and can be used safely with multiple gasses.

Our MKX regulator has a large body like that of MKIII which accommodates high flow rates with accuracy through our precision diaphragm. The adjustment bonnet/knob on the front of the regulator makes setting and adjusting accurate pressures easy. High and low pressures can be monitored on the regulator’s dual gauges.

This regulator is can also be used on a range of different gasses including: CO2, Oxygen, Argon, Helium and Nitrogen.

The post MKX Multi Regulators-CO2 – Type 30 appeared first on Brew Distill Ferment.

These regulator gauges can also be used on many other devices as the 1/4 NPT thread is fairly standard and it will suit most standard regulators.  Annoyingly Micromatic use an unusual Left Hand thread so this gauge will not fit Micromatic regulators but almost all other regulators will be compatible.

The post Regulator Low Pressure Gauge 0 – 80psi appeared first on Brew Distill Ferment.

The post Coupler Liquid Ball Lock Post appeared first on Brew Distill Ferment.

The post Keg Lid Foot appeared first on Brew Distill Ferment.

Within Australia, A-Type variety kegs are commonly associated with Independent Craft Breweries but are also utilised by Tooheys, Coopers and XXXX for their kegs.

Consider using a low profile to shorten the height of the coupler

The post Keg Coupler A-Type (German Slider) appeared first on Brew Distill Ferment.

This auto-closing spring is easy to fit, made from stainless steel and makes the taps even more reliable and easy to use.

The post Auto-Close Spring appeared first on Brew Distill Ferment.

Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.

Note: This item is the Stout Spout only (does not include tap) to make a complete unit you will also need to purchase a tap, tap handle and a shank

The post Intertap – Stout Spout appeared first on Brew Distill Ferment.

Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap.

Suitable for Intertaps

The post Intertap – Growler Filler Spout Threaded appeared first on Brew Distill Ferment.

The post Hose Barb (13mm x 1/2 BSP Male) appeared first on Brew Distill Ferment.

The post Hose Barb (13mm x 1/2 BSP Female) appeared first on Brew Distill Ferment.

The post Coupler Gas Ball Lock Post appeared first on Brew Distill Ferment.

Please Note: This does not come with a CO2 Bottle, Or the SodaStream unit itself.

The post FreedomOne Sodastream Adapter Hose – 72i appeared first on Brew Distill Ferment.

Made from solid stainless steel

The post Elbow Bend Low Profile appeared first on Brew Distill Ferment.

These O-Rings are the correct replacement for the O-Rings under the posts on your Corny kegs. When the o-rings are new they have a round cross section however after being used for some time they turn into a square cross section so dont be alarmed if you take the old one out and wonder why the new one is round. It’s simply that the old o-ring has changed shape over time.

The post Dip Tube O-Ring appeared first on Brew Distill Ferment.

Includes Post O-Ring
Does not include Poppet

The post Cornelius Type Liquid Post (Female Thread) appeared first on Brew Distill Ferment.

The post Grey Pressure Relief Valve appeared first on Brew Distill Ferment.

The post 9.5mm SS Stepless Line Clamp appeared first on Brew Distill Ferment.

Specifications:
15mm ID x 21.5mm OD x 2.45mm +- -0.1mm

The post 5/8 Silicone Washer for Keg Coupler and Tap Shank appeared first on Brew Distill Ferment.

The post 5/8 Inch Hex Nut for Keg Coupler or Tap appeared first on Brew Distill Ferment.

This is an easy and convenient way to split your single gas line into multiple gas lines.

NOTE: This product is not suitable for beer or other beverages.  It’s gas only.

The post 4 Output / 4 Way Gas Line Manifold appeared first on Brew Distill Ferment.

This is an easy and convenient way to split your single gas line into multiple gas lines.

NOTE: This product is not suitable for beer or other beverages.  It’s gas only.

The post 2 Output / 2 Way Gas Line Manifold appeared first on Brew Distill Ferment.

*Please note: Due to Dangerous Goods Shipping Restrictions, only six (6) 16g CO2 bulbs per order. This item cannot be delivered to a PO Box for delivery.*

The post 16g CO2 Cartridge/Bulb (Threaded) appeared first on Brew Distill Ferment.

The post 10.5mm SS Stepless Line Clamp appeared first on Brew Distill Ferment.

The post 1/4 Inch Ball Valve for Manifold-BSP appeared first on Brew Distill Ferment.

The post Duotight 8mm Gas Disconnect appeared first on Brew Distill Ferment.

The post Carbonation Cap Tee Piece appeared first on Brew Distill Ferment.

The lubricant minimises downtime, extends the life of moving parts and will not dry or gum on equipment. It cleans off equipment easily.

Specifications: 

• Odour and taste free, beer safe 
• Sanitary 
• Non-toxic 
• Food grade 
• Will not effect beer head retention

This lubricant is NSF rated H-1 and all ingredients are FDA approved for food contact.  The product is also Kosher Certified.

Suitable for Industries:

• Dairy
• Bakery
• Food
• Catering
• Meat
• Cannery
• Grocery
• Restaurant
• Beverage
• Brewery
• Cosmetic
• Chemical

Also Halal Certified

The post Food Grade Lubricant 28g appeared first on Brew Distill Ferment.