Accesories Archives - Brew Distill Ferment

Pure Distilling 2″ Bubble Plate

LightspeedRetailIntegration — Tue, 05 May 2026 02:18:52 +0000

2″ Copper Bubble Plate. Requires 2″ Bubble Plate seal to fix to the 2″ Sightglass.

The post Pure Distilling 2″ Bubble Plate appeared first on Brew Distill Ferment.

Pure Distilling 2″ Bubble Plate Seal

LightspeedRetailIntegration — Tue, 05 May 2026 02:18:18 +0000

Seals the 2″ Bubble Plate to the 2″ Sight Glass.

Note: This is not the same seal as a standard 2″ Tri-Clamp seal.

The post Pure Distilling 2″ Bubble Plate Seal appeared first on Brew Distill Ferment.

8mm Brass Barrel Tap

LightspeedRetailIntegration — Thu, 28 Nov 2024 05:39:30 +0000

Tappered brass tap suitable for wooden barrels. Use in your next barrel project or tap a barrel in you bar.

The post 8mm Brass Barrel Tap appeared first on Brew Distill Ferment.

Plastic Valenche Wine Sampler

LightspeedRetailIntegration — Thu, 28 Nov 2024 05:39:22 +0000

The post Plastic Valenche Wine Sampler appeared first on Brew Distill Ferment.

10mm Brass Barrel Tap

LightspeedRetailIntegration — Thu, 28 Nov 2024 05:38:35 +0000

Tappered brass tap suitable for wooden barrels. Use in your next barrel project or tap a barrel in you bar.

The post 10mm Brass Barrel Tap appeared first on Brew Distill Ferment.

Duotight – 8mm (5/16”) Female x 6.35mm (1/4”) Female Reducer

LightspeedRetailIntegration — Wed, 15 May 2024 00:56:58 +0000

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Why do we use Double O-rings?
The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

Compatible with
– EVA Barrier 5mm x 8mm Double-wall Beer / Gas line
– EVA Barrier 4mm x 8mm Double-wall Beer / Gas line

The post Duotight – 8mm (5/16”) Female x 6.35mm (1/4”) Female Reducer appeared first on Brew Distill Ferment.

ABS Pluto Gun Barb

LightspeedRetailIntegration — Wed, 15 May 2024 00:56:02 +0000

The pluto beer guns have become an iconic beer dispensing tool used throughout the industry. This ABS unit is a cost effective way to dispense at parties or as a backup.

Chrome plated with stainless steel barb and internals. The barb it comes with suits standard 4mm-6mm beer line.

The post ABS Pluto Gun Barb appeared first on Brew Distill Ferment.

Mini 360 Core Actuator Regulator

LightspeedRetailIntegration — Wed, 07 Feb 2024 01:51:25 +0000

KegLand Mini 360 Core Actuator Regulator – Sodastream & 16g & 74g Bulb Compatible

KegLand Mini 360 Core Actuator Regulator – Sodastream & 16g Bulb Compatible

The All-New Mini 360 Core Actuator Regulator brought to you by KegLand is the most versatile mini regulator on the market. After much feedback on how to make mini regulators more compact, sturdy and efficient. The brilliant engineers at KegLand have come up with this mini-beast.

This extremely versatile mini regulator can be used with either an Australian Sodastream Canister, the KegLand Sodastream Compatible Cylinders or the smaller disposable CO2 16g bulbs. If you would like to use the larger 74g disposable bulbs you can purchase the 74g bulb adaptor.Unlike other regulator designs this new design requires no sodastream adaptor and you do not have the issues of trying to screw the bulb or sodastream cylinder into the regulator while gas leaks everywhere. This robust, convenient and superior design is just what you need for any portable keg system.

Please note this is not compatible with the 2.6kg or 6.0kg CO2 Cylinders.

Includes:
1 x Mini 360 Core Actuator Regulator
1 x 360° 6.5mm duotight compatible hose barb
1 x 360° FFL Fitting for MFL Disconnects
1 x Port end cap
1 x 65psi Green PRV
1 x Sodastream to 16g thread bushing

The post Mini 360 Core Actuator Regulator appeared first on Brew Distill Ferment.

Intertap – Replacement Spout

LightspeedRetailIntegration — Wed, 17 Jan 2024 04:12:49 +0000

Replacement spout for the intertap

The post Intertap – Replacement Spout appeared first on Brew Distill Ferment.

Deluxe SodaStream Cylinder Adapter (with pin adjustment)

LightspeedRetailIntegration — Wed, 17 Jan 2024 04:11:57 +0000

Unlike our cheaper sodastream cylinder adaptors that you can find here, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor. This pin adjustment makes the sodastream cylinder adaptor significantly easier to use.

Normal sodastream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically. Also conventional cheaper sodastream adaptors also tend to leak gas every time you connect and disconnect them from your regulator or the adaptor itself. This is also a pain. This new sodastream adaptor design is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow.

This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or picnic and you don’t want to carry your 6kg or 2.6kg Gas Cylinder this is the adaptor that will enable you to make a handy portable system.

Ideal for the low volume user or someone who hasn’t bit the bullet in a big cylinder.

The post Deluxe SodaStream Cylinder Adapter (with pin adjustment) appeared first on Brew Distill Ferment.

Pure Distilling Condenser seal

LightspeedRetailIntegration — Sat, 05 Aug 2023 03:58:54 +0000

Condenser Seal (seals condenser to boiler lid) 60mm ID

The post Pure Distilling Condenser seal appeared first on Brew Distill Ferment.

KCl 3mol/Litre Storage Solution (25ml)

LightspeedRetailIntegration — Sat, 05 Aug 2023 03:57:14 +0000

This KCL storage solution is the best way to keep your electrode from your PH meter from deteriorating over time. If you want to continue to get accurate readings always keep some storage solution in the cap.

The post KCl 3mol/Litre Storage Solution (25ml) appeared first on Brew Distill Ferment.

Fermenter Lid 30l Pail Hole

LightspeedRetailIntegration — Tue, 25 Jul 2023 06:40:36 +0000

Spare plastic lid that suits pail style fermenter. Made from food-grade plastic

The post Fermenter Lid 30l Pail Hole appeared first on Brew Distill Ferment.

12.8mm SS Stepless Line Clamp

LightspeedRetailIntegration — Wed, 29 Mar 2023 00:16:24 +0000

Stepless clamps are designed to tighten in an exact circle around the hosing, simply use a crimping tool or the middle cutter on your pliers to crimp (not squeeze) the stepless clamp closed.

The post 12.8mm SS Stepless Line Clamp appeared first on Brew Distill Ferment.

Keg Line 5mm x 8mm

LightspeedRetailIntegration — Fri, 09 Dec 2022 03:12:32 +0000

EVAFresh walled tubing is made with an EVA outter wall and also an inner proprietary polymer barrier. The 5mm ID x 8mm OD EVAFresh line provides brewers with the ability to use less line length between the keg and the tap due to its narrower internal diameter. We recommend 1.4 to 1.7 per tap on shorter direct draw systems like kegerators and keezer builds.

EVAFresh contains an inner barrier made from a proprietary polymer that provides excellent oxygen protection while preventing Co2 loss in your beverage. Your beer will stay fresher for longer and not loose carbonation. With EVAFresh tubing you’ll be able to keep the freshness in your beer and beverages, even if the liquid has been sitting in the line between pours.

EVAFresh has an internal surface that is incredibly smooth while remaining almost entirely impermiable to oxygen. This unique quality makes it extremely difficult for bacteria and other microbes establish inside EVAFresh tubing.

The outter barrier is made from EVA material that seals well when used push in fittings and is much easier to attach to barbed disconnects than our previous bevearge line. EVA outter barrier gives the tubing excellent flexibility so the line is far less likely to kink or crack when it is bent or coiled.

The post Keg Line 5mm x 8mm appeared first on Brew Distill Ferment.

Cornelius Pressure Relief Valve RED 35psi (2.5Bar)

LightspeedRetailIntegration — Fri, 09 Dec 2022 03:12:24 +0000

Cornelius Type Pressure Relief Valve (PRV) for Keg Lids or MK4 Regulator – RED 35psi (2.5Bar)

These pressure relief valves are made to the cornelius standard and are compatible with cornelius type kegs.

These are accurately made and batch tested for consistency.

This important safety mechanism has been manufactured to tight specifications to ensure it’s reliability.

Please be aware that these pressure relief valves should be clean to work correctly. If dried up beer or sugar gets into the pressure relief valve then clean this out immediately as this can effect the safe working and opening pressures.

The post Cornelius Pressure Relief Valve RED 35psi (2.5Bar) appeared first on Brew Distill Ferment.

Keg Line 4mm x 8mm

LightspeedRetailIntegration — Fri, 09 Dec 2022 03:12:05 +0000

EVAFresh walled tubing is made with an EVA outter wall and also an inner proprietary polymer barrier. The 4mm ID x 8mm OD EVAFresh line provides brewers with the ability to use less line length between the keg and the tap due to its narrower internal diameter. We recommend 1.4 to 1.7 per tap on shorter direct draw systems like kegerators and keezer builds.

The post Keg Line 4mm x 8mm appeared first on Brew Distill Ferment.

Keg Line 6.3mm 9.5mm

LightspeedRetailIntegration — Fri, 09 Dec 2022 03:11:00 +0000

EVAFresh 6.3mm ID x 9.5mm OD line is best paired with our glycol/icebank systems or temprite serving systems. For those of you measuring in imperial (freedom units), the inner diameter is 1/4 inch. This size beverage tubing is excellent for long draw keg systems where your bar taps are further away from the kegs so a lower line resistance is required.

This 6.3mm size is not recommended for direct draw kegerators/keezer set ups as it would require up to 8 meters of line per tap. For these types of keg systems, use EVAFresh 4mm or 5mm

The post Keg Line 6.3mm 9.5mm appeared first on Brew Distill Ferment.

Blue Bottler Easy Syphon

LightspeedRetailIntegration — Fri, 07 Oct 2022 01:26:41 +0000

A spring loaded bottling valve for use with most standard fermenter taps.This brew bottler is suitable for use with a variety of bottle sizes and can be used with or without the spring. Simply push the tip of the bottler against the bottom of the bottle to begin filling. The flow will stop once the bottler is lifted away from the bottom.

The post Blue Bottler Easy Syphon appeared first on Brew Distill Ferment.

Bottle Rinser

LightspeedRetailIntegration — Fri, 07 Oct 2022 01:00:42 +0000

This bottle rinser makes cleaning bottles easy! It allows for the quick “injection” of cleaners, sanitisers, or rinsing water into bottles. All detergents/water are returned to a holding reservior for re-use.

The post Bottle Rinser appeared first on Brew Distill Ferment.

Bottle Draining Tree

LightspeedRetailIntegration — Fri, 07 Oct 2022 00:58:11 +0000

A green bottle tree for drying 63 bottles. Makes bottling day alot easier

The post Bottle Draining Tree appeared first on Brew Distill Ferment.

Keg – 19L Ball Lock

LightspeedRetailIntegration — Fri, 07 Oct 2022 00:31:14 +0000

19L Keg Ball Lock Conelius Corny Keg

Keg King 19L Ball Lock Kegs are manufactured using a robotic orbital welding machine for percision accuracy and quality.

Constructed from food grade 304 Stainless Steel Keg King 19L Ball Lock Kegs are built in compliance with AS2971.

The superior finish on these kegs makes them sturdier and more reliable than the brushed finish on most economy kegs.

The black rubber on these kegs also make them a little nicer to use around your house as they are less likely to damage your tile floors or crack plastic lining inside your kegerator.

Keg King 19L Ball Lock Kegs are equipped with a handy stainless steel loop attached to the underside of the keg lid, making it easy to suspend and remove a hop bomb, flavour infuser or hop pouch within the keg for adding extra flavour to your beverage.

The post Keg – 19L Ball Lock appeared first on Brew Distill Ferment.

Premium Stainless-Steel Pluto Gun

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:26:45 +0000

The pluto beer guns have become an iconic beer dispensing tool used throughout the industry.

A compact, simple, and ergonomic way to pour beers. They allow you to hold the beer gun rather than the glass. This premium full stainless steel pluto is perfect for a simple keg setup in an existing fridge, a spare tap, for taking to parties/camping, serving at functions/venues etc.

The ease of use and reliability of pluto guns has meant they’ve found a variety of other uses, such as topping up wine barrels, dispensing cleaning chemicals, flushing out dip tubes when cleaning kegs, dispensing sports drinks for sports events and more.

The post Premium Stainless-Steel Pluto Gun appeared first on Brew Distill Ferment.

Ice Pack

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:25:27 +0000

Add an icepack to your online yeast & culture order to help ensure it makes it to you in peak condition.

Also if an online order containing a yeast/culture is placed on a Friday, we won’t ship it till the Monday to avoid having it sit with postal services over the weekend.

The post Ice Pack appeared first on Brew Distill Ferment.

Intertap PC Tap with Handle

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:25:24 +0000

This Plated Chrome (PC) model is an economical choice offering all the advantages of the forward sealing design and interchangeable tap spout. The durable electroplated chrome finish is superior to most of the Chinese spray on coatings and it’s a great introduction to the Intertap range. It has a smooth bore to aid a completely laminar flow and foam free dispensing of beer.

The post Intertap PC Tap with Handle appeared first on Brew Distill Ferment.

Heating Belt 30 Watt

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:24:39 +0000

The 30 watts will gently warm without creating a hot spot. Heating belts are preferable to heating pads for the reasons that they can simply be moved up or down the fermenter to increase or decrease the heat transfer to the brew.

Heating belts are also preferable to heating pads because pads tend to heat up the yeast bed on the bottom of the fermenter which can produce some undesirable flavours in your beer.

The heating belt can also be plugged into our MKII 10/30amp Temperature Controller for a more accurate temperature of your fermenter.

Heat belts are not recommended for direct contact with heat sensitive materials like PET

The post Heating Belt 30 Watt appeared first on Brew Distill Ferment.

Duotight – 8mm One Way Check Valve (Gas)

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:23:55 +0000

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Compatible with
– EVABarrier 4mm ID x 8mm OD line
or
– EVABarrier 5mm ID x 8mm OD line

The post Duotight – 8mm One Way Check Valve (Gas) appeared first on Brew Distill Ferment.

Fermenter Lid O-Ring Ampi 220mm

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:23:51 +0000

Replacement seal for ampi style fermenters. Fits 15L/30L/60L ampi fermenter lids

The post Fermenter Lid O-Ring Ampi 220mm appeared first on Brew Distill Ferment.

Fermenter Lid Ampi Hole

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:23:36 +0000

Ampi style fermenter lid with drilled hole for a grommet and airlock

The post Fermenter Lid Ampi Hole appeared first on Brew Distill Ferment.

Bronco / Picnic Party Tap

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:23:26 +0000

Keg Tap Picnic Bronco

The post Bronco / Picnic Party Tap appeared first on Brew Distill Ferment.

20L Hot Fill Wine/Wort Cask Bladder – Hot Cube Alternative

LightspeedRetailIntegration — Wed, 05 Oct 2022 22:20:55 +0000

Stop wasting time chilling home brew wort. These bladders/bags are ideally suited to brewers who want to save time and avoid chilling wort on your brew day. Simply fill with hot wort and screw on the cap.

These bladders have a maximum 20L capacity. Meaning you can fill to 20L.
We would highly recommend underfilling to 15L so that it is more malleable and less likely to burst or rip from “overfilling hot”.

The post 20L Hot Fill Wine/Wort Cask Bladder – Hot Cube Alternative appeared first on Brew Distill Ferment.

Fermenter Tap – Adjustable Spout

LightspeedRetailIntegration — Wed, 05 Oct 2022 21:27:35 +0000

Sutiable for Pail fermenters. Has a backing nut and rubber caskets making it suitable for a variety of fermenters. perfect for home made fermenters made frome food grade buckets.

The post Fermenter Tap – Adjustable Spout appeared first on Brew Distill Ferment.

Pail Accessories Package (Tap, S-bend Airlock, Top Hat Grommet & Stick-On Thermometer)

LightspeedRetailIntegration — Wed, 05 Oct 2022 21:26:26 +0000

Pail Fermenter Accessories Package (Tap, S-bend Airlock, Top Hat Grommet & Stick-On Thermometer)

The post Pail Accessories Package (Tap, S-bend Airlock, Top Hat Grommet & Stick-On Thermometer) appeared first on Brew Distill Ferment.

Mangrove Jack’s Heat Pad 25W

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:15:19 +0000

This Mangrove Jack’s Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits. Heat Pad SpeCraft Series: – Provides low, constant heat where it is needed for fermentation. – Aids yeast activity and helps avoid stuck fermentation. – Inexpensive to run. – Voltage: 220-240V – Power: 25W

The post Mangrove Jack’s Heat Pad 25W appeared first on Brew Distill Ferment.

Bottle Capper Bell – Champagne

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:15:14 +0000

Bottle Capper Bell Champagne

A slightly larger Capping Bell to use for Champaign Crown Seals (Tirage) on Champaign Bottles. Fits the Super Auto Bench capper.

The post Bottle Capper Bell – Champagne appeared first on Brew Distill Ferment.

Bottle Capper Bell – Standard

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:15:10 +0000

Bottle Capper Bell Standard

Super Auto Bench Capper Replacement Standard Capping Bell. Replacement bell for standard 26mm caps / crown seals.

The post Bottle Capper Bell – Standard appeared first on Brew Distill Ferment.

Bung Silicon Solid 25-38mm

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:15:04 +0000

A solid silicone bung with a 25-38mm taper. fits most 5l swintop demijohn

The post Bung Silicon Solid 25-38mm appeared first on Brew Distill Ferment.

Bung Silicon Bored 25-38mm

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:14:54 +0000

A bored silicone bung with a 25-38mm taper. Bored hole fits an airlock. Fits most 5l swing top demijohns

The post Bung Silicon Bored 25-38mm appeared first on Brew Distill Ferment.

Bung Silicon Solid 37-45mm

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:14:48 +0000

A solid silicone bung with a 37-45 mm taper. Fits the 5l screw top demijohn

The post Bung Silicon Solid 37-45mm appeared first on Brew Distill Ferment.

Bung Silicon Bored 37-45mm

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:14:44 +0000

A bored silicone bung with a 37-45 mm taper. Bored hole fits an airlock. Fits screw top 5l demijohns

The post Bung Silicon Bored 37-45mm appeared first on Brew Distill Ferment.

Bung Special Bored 28-32mm

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:14:33 +0000

A bored bung with a 28-30mm taper. Bored hole fits an airlock. Fits most 5l fliptop demijohn

The post Bung Special Bored 28-32mm appeared first on Brew Distill Ferment.

Bung Silicon Solid 47-58mm

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:14:19 +0000

A solid silicone bung with a 47-58mm taper. Fits 54 L glass demijohns.

The post Bung Silicon Solid 47-58mm appeared first on Brew Distill Ferment.

Bung Silicon Bored 47-58mm

LightspeedRetailIntegration — Wed, 05 Oct 2022 06:14:16 +0000

A bored silicone bung with a 47-58mm taper. Bored hole fits an airlock

The post Bung Silicon Bored 47-58mm appeared first on Brew Distill Ferment.

Flip Top for 500ml / 750ml Beer Bottle

LightspeedRetailIntegration — Sat, 03 Sep 2022 00:17:03 +0000

Replacement fliptop for 500ml and 750ml bottles

The post Flip Top for 500ml / 750ml Beer Bottle appeared first on Brew Distill Ferment.

Hydrometer

LightspeedRetailIntegration — Sat, 03 Sep 2022 00:11:38 +0000

An absolute must have for any brewer, amateur to professional. Nothing can go past the accuracy and no-nonsense faffin about than a trusted hydrometer.
A Hydrometer Measures the density or specific gravity of a liquid. Used to give a reading to the gravity of your wort.
Suspend the Hydrometer in a sample of your wort to get the reading.

To calculate your % Alcohol By Volume
(OG – FG) x 131.25 = ABV %
Where OG is your Original Gravity e.g. 1.050 as shown by your hydrometer before you pitch your yeast.
and FG “Final Gravity” e.g. 1.010 as shown by the hydrometer after it has fermented.
= ( 1.050 – 1.010 ) x 131.25
= 5.25% ABV

The post Hydrometer appeared first on Brew Distill Ferment.

Hop Sock/Small Grain Bag – BIAB

LightspeedRetailIntegration — Fri, 02 Sep 2022 23:33:22 +0000

These polyester hop socks are perfect for small grain additions or for hopping beer. This is a tube of fabric that is 15cm wide and 75cm long. Both ends are open for easy cleaning and can simply be tied closed while being used. Perfect for grain or hops (suitable for use up to 110 degrees C)

The post Hop Sock/Small Grain Bag – BIAB appeared first on Brew Distill Ferment.

6mm Straight Barb Tail for (5/8 Hex Nut)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:13:01 +0000

Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank
This size barb is ideally suited to tubing/hose that is 4-6mm ID

The post 6mm Straight Barb Tail for (5/8 Hex Nut) appeared first on Brew Distill Ferment.

6mm Angle Barb Tail (for 5/8 Hex Nut)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:11:46 +0000

Angle Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shank

This size barb is ideally suited to tubing/hose that is 4-6mm ID.

The post 6mm Angle Barb Tail (for 5/8 Hex Nut) appeared first on Brew Distill Ferment.

Premium Ball Lock Disconnect (Grey/Gas)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:09:35 +0000

These high quality plastic disconnects are the most common homebrewer piece of equipment to attach to ball lock kegs. The Premium Ball Locks are designed with the highest tolerances and quality control standards. The barbs are made from stainless steel

The post Premium Ball Lock Disconnect (Grey/Gas) appeared first on Brew Distill Ferment.

Premium Ball Lock Disconnect (Black/Liquid)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:09:31 +0000

The post Premium Ball Lock Disconnect (Black/Liquid) appeared first on Brew Distill Ferment.

Post O-Ring (for ball lock kegs)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:09:28 +0000

These are the o-ring seals that fit on the top of your ball lock and pin lock kegs and liquid and carbonation caps. These handy o-rings also fit garden taps too so you can stop that annoying leaky garden tap a the same time.

These are a very common o-ring type and definitely handy to have a few spares.

The post Post O-Ring (for ball lock kegs) appeared first on Brew Distill Ferment.

Poppet O-ring

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:09:25 +0000

Replacement O-Ring for the poppet in your cornelius post

The post Poppet O-ring appeared first on Brew Distill Ferment.

Nylon Regulator Washer

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:09:01 +0000

To fit the range of MK Regulators.
Plumbers tape not required. Simply screw your regulator in tightly, the washer will make a complete seal.

The post Nylon Regulator Washer appeared first on Brew Distill Ferment.

Keg Coupler A-Type (German Slider)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:08:07 +0000

A-Tye Keg Couplers are also referred to as German Slider Couplers and are found on a range of kegged beverage varieites.

Within Australia, A-Type variety kegs are commonly associated with Independent Craft Breweries but are also utilised by Tooheys, Coopers and XXXX for their kegs.

Consider using a low profile to shorten the height of the coupler

The post Keg Coupler A-Type (German Slider) appeared first on Brew Distill Ferment.

Auto-Close Spring

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:07:56 +0000

Have you ever had a few too many drinks and forgotten to turn the tap off completely only to find that your entire keg is on the floor? Well that is an issue no longer. With this new auto-closing tap spring you can fit it between the tap shank and the shuttle within the Intertap and it will automatically close the tap when you let go of the handle. Problem solved.

This auto-closing spring is easy to fit, made from stainless steel and makes the taps even more reliable and easy to use.

The post Auto-Close Spring appeared first on Brew Distill Ferment.

Hose Barb (13mm x 1/2 BSP Male)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:06:56 +0000

Stainless Hose Barb 13mm x 1/2 inch BSP Male To be used with Heavy Duty 13.5mm Silicone Hose.

The post Hose Barb (13mm x 1/2 BSP Male) appeared first on Brew Distill Ferment.

Hose Barb (13mm x 1/2 BSP Female)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:06:52 +0000

Stainless Steel Barb 13mm x 1/2 BSP Female

The post Hose Barb (13mm x 1/2 BSP Female) appeared first on Brew Distill Ferment.

Elbow Bend Low Profile

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:06:21 +0000

This low profile elbow bend is “THE LOWEST” elbow bend available in Australia.
It only sits 17mm above the top of the keg coupler. Perfect for tight spaces or inside a Kegerator.

Made from solid stainless steel

The post Elbow Bend Low Profile appeared first on Brew Distill Ferment.

Dip Tube O-Ring

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:06:08 +0000

These o-rings are a high quality o-ring made from Nitrile N70 compound. The dip tube o-ring is easy to replace and is simply a matter of removing the post first then lifting up the gas and liquid dip tubes to reveal the location of the o-ring.

These O-Rings are the correct replacement for the O-Rings under the posts on your Corny kegs. When the o-rings are new they have a round cross section however after being used for some time they turn into a square cross section so dont be alarmed if you take the old one out and wonder why the new one is round. It’s simply that the old o-ring has changed shape over time.

The post Dip Tube O-Ring appeared first on Brew Distill Ferment.

Cornelius Type Liquid Post (Female Thread)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:05:50 +0000

Replacement Liquid Ball Lock Post for Cornelius Kegs. The liquid posts DO NOT have a score/strike on them. A liquid ball lock will only fit on a liquid post, and vice versa for gas.

Includes Post O-Ring
Does not include Poppet

The post Cornelius Type Liquid Post (Female Thread) appeared first on Brew Distill Ferment.

Cornelius Type Keg Lid (with Oring & PRV)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:05:46 +0000

This replacement Keg Lid is suitable for Cornelius Type 19L and 9.5L Kegs.
Features:
– High quality stainless steel
– Ring pull pressure relief valve
– Inside hook to attach hop bombs or a hop tube (image 2)

The post Cornelius Type Keg Lid (with Oring & PRV) appeared first on Brew Distill Ferment.

Cornelius Type Gas Post (Female Thread)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:05:42 +0000

The gas posts have a score/strike on them to identify them. A gas ball lock will only fit on a gas ball lock post. And vice versa for a liquid ball lock.
Includes Ball Lock Post O-Ring
Does not include poppet

The post Cornelius Type Gas Post (Female Thread) appeared first on Brew Distill Ferment.

Grey Pressure Relief Valve

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:05:38 +0000

These pressure relief valves are made to the cornelius standard and are compatible with cornelius type kegs.

These are accurately made and batch tested for consistency.

This important safety mechanism has been manufactured to tight specifications to ensure it’s reliability.

Grey Pressure relief valves can take up to 100psi or 7bar

The post Grey Pressure Relief Valve appeared first on Brew Distill Ferment.

9.5mm SS Stepless Line Clamp

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:04:48 +0000

These clamps are the golden standard in what comes in your Kegerator kit, and used widely for 5mm ID and 6mm ID x 8mm OD beer and gas line. If you are using 4mm ID x 8mm OD beer hose, you will need to purchase the 7-10mm (10.5mm) Clamps as the internal wall is thicker and won’t fit over the clamp.
Stepless clamps are designed to tighten in an exact circle around the hosing, simply use a crimping tool or the middle cutter on your pliers to crimp (not squeeze) the stepless clamp closed.

The post 9.5mm SS Stepless Line Clamp appeared first on Brew Distill Ferment.

5/8 Silicone Washer for Keg Coupler and Tap Shank

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:04:27 +0000

This is a Silicone 5/8 Washer which is suitable for Keg Couplers and Tap Shanks

Specifications:
15mm ID x 21.5mm OD x 2.45mm +- -0.1mm

The post 5/8 Silicone Washer for Keg Coupler and Tap Shank appeared first on Brew Distill Ferment.

5/8 Inch Hex Nut for Keg Coupler or Tap

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:04:23 +0000

5/8 Inch Hex Nut for Keg Coupler or Tap Shank Used to attach either the Angle Barbtail or the Straight Barbtail

The post 5/8 Inch Hex Nut for Keg Coupler or Tap appeared first on Brew Distill Ferment.

4 Output / 4 Way Gas Line Manifold

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:04:15 +0000

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

This is an easy and convenient way to split your single gas line into multiple gas lines.

NOTE: This product is not suitable for beer or other beverages. It’s gas only.

The post 4 Output / 4 Way Gas Line Manifold appeared first on Brew Distill Ferment.

2 Output / 2 Way Gas Line Manifold

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:04:12 +0000

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

This is an easy and convenient way to split your single gas line into multiple gas lines.

NOTE: This product is not suitable for beer or other beverages. It’s gas only.

The post 2 Output / 2 Way Gas Line Manifold appeared first on Brew Distill Ferment.

16g CO2 Cartridge/Bulb (Threaded)

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:04:05 +0000

Suitable for use with mini regs as well as Whipped Cream Dispensers for carbonating water ect.
Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense.

*Please note: Due to Dangerous Goods Shipping Restrictions, only six (6) 16g CO2 bulbs per order. This item cannot be delivered to a PO Box for delivery.*

The post 16g CO2 Cartridge/Bulb (Threaded) appeared first on Brew Distill Ferment.

10.5mm SS Stepless Line Clamp

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:04:01 +0000

Stepless clamps are designed to tighten in an exact circle around the hosing, simply use a crimping tool or the middle cutter on your pliers to crimp (not squeeze) the stepless clamp closed.

The post 10.5mm SS Stepless Line Clamp appeared first on Brew Distill Ferment.

1/4 Inch Ball Valve for Manifold-BSP

LightspeedRetailIntegration — Mon, 25 Jul 2022 06:03:57 +0000

These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another

The post 1/4 Inch Ball Valve for Manifold-BSP appeared first on Brew Distill Ferment.

Duotight 8mm Gas Disconnect

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:59:32 +0000

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably – no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings – no cheap ABS plastics here – this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required – no need to ever have blocked poppets again when it is this easy to disassmble and clean.

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

The post Duotight 8mm Gas Disconnect appeared first on Brew Distill Ferment.

Duotight Inline Regulator – With integrated gauge for water or gas – 8mm

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:59:28 +0000

These compact inline regulators have been designed to suit 8mm (5/16″) Evabarrier Tubing. For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate.

Suits pressures 0-150psi however this unit is packed with the 0-60psi gauge as standard.

Suitable for mains water pressure

Suitable for liquid or gas

Made from Acetal/POM, EPDM o-rings and stainless teeth

Suits 8mm (5/16) OD Tubing such as our Evabarrier Tubing

Includes integrated 0-60psi Pressure Gauge

The post Duotight Inline Regulator – With integrated gauge for water or gas – 8mm appeared first on Brew Distill Ferment.

Duotight – Blowtie 2 Spunding Valve /Pressure Relief with Integrated Gauge 0-15psi

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:59:16 +0000

This kit has been designed for simplicity and ease of putting together.

If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.

The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.

This BlowTie unit can be easily dissassembled for cleaning using a phillips head screw driver.

Designed to suit 8mm (5/16″) Evabarrier Tubing. It’s compatible with both the 4mm ID Tubing here or 5mm ID here.

Specifications:
1. Suits pressures 0-15psi (but with different guages the unit can go above 100psi)
2. Made from food grade acetal
3. Stainless screws
4. 8mm (5/16″) push on both sides

If you are looking for a compact digital gauge with backlight illumination click here.

The post Duotight – Blowtie 2 Spunding Valve /Pressure Relief with Integrated Gauge 0-15psi appeared first on Brew Distill Ferment.

Duotight – 8mm (5/16”) Female Ball Valve/Shut Off Valve

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:59:08 +0000

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

The post Duotight – 8mm (5/16”) Female Ball Valve/Shut Off Valve appeared first on Brew Distill Ferment.

Duotight – 8mm (5/16”) Female x ¼” BSP Male Thread (With Seated O-Ring)

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:58:57 +0000

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

The post Duotight – 8mm (5/16”) Female x ¼” BSP Male Thread (With Seated O-Ring) appeared first on Brew Distill Ferment.

Duotight – 8mm (5/16”) Female x FFL Female Thread (to fit MFL Disconnects)

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:58:53 +0000

Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

The post Duotight – 8mm (5/16”) Female x FFL Female Thread (to fit MFL Disconnects) appeared first on Brew Distill Ferment.

Duotight 8mm Liquid Disconnect

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:58:35 +0000

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

The post Duotight 8mm Liquid Disconnect appeared first on Brew Distill Ferment.

Duotight – 8mm (5/16”) Female x 8mm (5/16”) Female Double Tee Piec

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:58:29 +0000

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Compatible with
–4mm ID x 8mm OD line
–5mm ID x 8mm OD line

The post Duotight – 8mm (5/16”) Female x 8mm (5/16”) Female Double Tee Piec appeared first on Brew Distill Ferment.

Duotight – 8mm (5/16”) Female x 5/8” Female Thread (suits Keg Couplers and Tap Shanks)

LightspeedRetailIntegration — Mon, 25 Jul 2022 05:58:25 +0000

Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

The post Duotight – 8mm (5/16”) Female x 5/8” Female Thread (suits Keg Couplers and Tap Shanks) appeared first on Brew Distill Ferment.