The post Pure Distilling 2″ Bubble Plate appeared first on Brew Distill Ferment.

Why Upgrade?

• Reduce Evaporation Loss – Capture up to an additional 250ml of 93% spirit during runs by preventing vapour escape.

• Instant Alcometer Readings – Delivers accurate temperature-stable readings without correction charts or waiting.

• Easy Installation – Simply unscrew your existing product arm and fit the Output Cooler finger-tight, no tools required.

• Fully Compatible – Designed to connect seamlessly with the Reflux Condenser using the supplied short hose and standard water inlet/outlet setup.

In the Box

• Output Cooler unit

• Short connection hose

• Quick-start installation guide

Made in Tasmania, Australia

Built to last and tested in-house for consistent performance, the Output Cooler is a simple yet powerful upgrade to get the most out of every run.

The post Pure Distilling Reflux Condenser Output Cooler appeared first on Brew Distill Ferment.

Note: This is not the same seal as a standard 2″ Tri-Clamp seal.

The post Pure Distilling 2″ Bubble Plate Seal appeared first on Brew Distill Ferment.

The post Still Spirits Air Still Pro Complete Distillery Kit appeared first on Brew Distill Ferment.

The post Pure Distilling Filter Tap appeared first on Brew Distill Ferment.

The post Pure Distilling Condenser seal appeared first on Brew Distill Ferment.

The Pure Distilling Alembic Dome is made from 99.7% copper and is double the weight of competitors! The dome fits on top of your boiler, used in place of the boiler lid.

The post Pure Distilling Alembic Copper Dome appeared first on Brew Distill Ferment.

The post Still Spirits Stainless Saddles 500g appeared first on Brew Distill Ferment.

The post Still Spirits Copper Saddles 100g appeared first on Brew Distill Ferment.

The post Pure Distilling Stainless Steel Packing Mesh appeared first on Brew Distill Ferment.

The post Syringe 10ml appeared first on Brew Distill Ferment.

The post Mangrove Jack’s Heat Pad 25W appeared first on Brew Distill Ferment.

The post Alcometer appeared first on Brew Distill Ferment.

To calculate your % Alcohol By Volume 
(OG – FG) x 131.25 = ABV %
Where OG is your Original Gravity e.g. 1.050 as shown by your hydrometer before you pitch your yeast.
and FG “Final Gravity” e.g. 1.010 as shown by the hydrometer after it has fermented.
= ( 1.050 – 1.010 ) x 131.25 
= 5.25% ABV

The post Hydrometer appeared first on Brew Distill Ferment.

The post Still Spirits Air Still Washers x10 appeared first on Brew Distill Ferment.

The post Still Spirits Air Still Rubber Ring appeared first on Brew Distill Ferment.

The post Still Spirits Air Still Infusion Basket appeared first on Brew Distill Ferment.

The post Still Spirits Air Still Carbon Cartridge x10 appeared first on Brew Distill Ferment.

The post Still Spirits Air Still Ceramic Boil Enhancers 30g appeared first on Brew Distill Ferment.

The post Still Spirits T500 Column/Alembic Condenser O-Ring appeared first on Brew Distill Ferment.

The post Still Spirits T500 Condenser Water Flow Adaptor appeared first on Brew Distill Ferment.

The post Flat Silicon Lid Seal appeared first on Brew Distill Ferment.

The post Still Spirits T500 Condenser Water Flow Controller appeared first on Brew Distill Ferment.

The post Still Spirits T500 Condenser Temp Sensor Thermometer appeared first on Brew Distill Ferment.

The post Still Spirits T500 Condenser Botanical Basket appeared first on Brew Distill Ferment.

We’re all familiar with having to try and keep someone from flushing the toilet or turning the dishwasher on while we’re distilling so we can get the best results. Now you don’t have to worry! The Still Spirits Water Flow Regulator is designed to perfectly control water flow when using the still. We have designed your own small water supply especially for your still. Connect this device to your tap, let it fill with water, and you have a reservoir of water for your still. The Water Flow Regulator includes: – Its own built in pump to supply water to your still. – A float valve to regulate how much water it holds. – A water flow controller, so that you can set it to the exact flow rate for your needs. – A cool reservoir to store up to 1 L of water.

The post Still Spirits T500 Water Flow Regulator appeared first on Brew Distill Ferment.

You can ferment inside where its a nice constant temperature for a better tasting alcohol  and not even know its there!

Made from 304 stainless for hygiene and will last a lifetime.

The post Pure Distilling Smell Eliminator Kit appeared first on Brew Distill Ferment.

The post Pure Distilling High Yield Tap Kit appeared first on Brew Distill Ferment.

Features include:

• A dual element control heating system (500w & 1700w)
• A volume scale for easy filling
• Connects to power via a normal 10 amp plug

We recommend using both elements to heat up the wash to quickly achieve a rolling boil, once the desired temperature is reached we turn off the 500w element – leaving the 1700w on at all times to maintain a good head of steam

To be used in conjuction with Pure Distilling Distillery Kit.

The post Pure Distilling Heated 30L Boiler 2000w appeared first on Brew Distill Ferment.

Pure Distilling Pot Still Condenser with digital thermometer, speciality Rum & Whiskey yeasts, 2 x 100g sample Barrel Chunks, instructions and mounting hardware.

A pure pot still is used when you want the flavour of the wash to come through. For instance, if you ferment fruit or grains, it will allow some of that flavour to enter your distillate. If you use a reflux still like the Home Spirit Maker, you would just end up with pure, unflavoured vodka. Inject some flavour into your drinks with the Pure Distilling Pot Still!

4.5L/hr with alcohol or 2.8L/hr with water

With an all copper construction for smoothness of taste it comes with a digital thermometer and is simple to use.

Just switch it on and collect your alcohol – it couldn’t be simpler than that!

The post Pure Distilling Copper Pot Condenser appeared first on Brew Distill Ferment.

The post Pure Distilling 15L Smart Filter appeared first on Brew Distill Ferment.

Temperature Range:
-54°C to 200°C

The post Tri Clamp Silicone Seal 2″ appeared first on Brew Distill Ferment.

The post Pure Distilling Triclover Screen 2″ 80 Mesh appeared first on Brew Distill Ferment.

The post Pure Distilling Triclover Screen 2″ 40 Mesh appeared first on Brew Distill Ferment.

This is a standard 2inch tri-clover clamps. They are commonly used in brewery hardware and are compatible with our Alcoengine Pot Stills and Reflux Stills and will allow you to connect these stills to keg boilers.

They are often used on brewery hardware larger than 100L in size.

The post Triclover Clamp 2″ appeared first on Brew Distill Ferment.

The post Pure Distilling Triclover Blanking Plate 2″ appeared first on Brew Distill Ferment.

The post Pure Distilling Tap O-ring appeared first on Brew Distill Ferment.

The post Pure Distilling Sight Glass Kit appeared first on Brew Distill Ferment.

The post Pure Distilling Sight Glass 2″ appeared first on Brew Distill Ferment.

With its easy to use operation, amazing features, and rock-solid reliability, the Reflux Condenser is the foundation of Pure Distilling. Even as our competitors try to catch up, the technologies and features built into this design keep it years ahead. Whether you’re assembling the whole unit in under a minute, or watching your bottles fill with commercially quality alcohol – it is simple, easy and fun to use.

We are so confident in our design that we offer a full 5 year warranty.

Effortless Operation

From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you.  All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.

The Reflux Condenser uses advanced LM technology (liquid management) which offers automatic temperature control.  Set the water flow once, and simply check ONE thermometer to see when the process is complete.  Condensers using older VM technology require constant water adjustment and monitoring of multiple thermometers. Get it wrong and quality suffers, possibly even losing your entire batch.

Elegant Design

While others advertise ‘cutting edge’, and ‘technologically advanced’ we believe simple is easy, and easy is best. Why wouldn’t you start with the best?

The reason the Reflux Condenser looks less complicated than other condensers?  It IS less complicated!  All the fancy technical stuff has gone into the internal design, rather than wires and tubes everywhere, allowing this condenser to have BETTER performance than competitors, while actually being easier to use.  Its a case of good old Aussie ingenuity rather than mass produced Chinese products.

The single, accurate thermometer ensures everything is running as it should, and tells you when its time to stop.

Amazing Features

93% alcohol and 97% yield

Fast — Makes 13 bottles in about 4 hours.

Pure — Delivers great tasting 93% alcohol with smooth flavour.

Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.

Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.

The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.

Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.

5 Year Warranty
Problems? No problem!  If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty?  Simply put – quality.  We use only solid copper and brass, have no breakable plastic parts, and an elegant design.

Australian Owned and Manufactured
All our condensers are 100% Australian made

The post Pure Distilling Reflux Condenser appeared first on Brew Distill Ferment.

The post Pure Distilling Premium Sight Glass Kit appeared first on Brew Distill Ferment.

The post Pure Distilling Plastic Hose Connectors appeared first on Brew Distill Ferment.

Steps to change over hose connectors:

1. Carefully undo the compression nut on the barbed fitting
2. Replace the barb fitting with the snap on hose connector
3. Carefully do up the nuts taking care not to overtighten

The post Pure Distilling Hose Connector Kit appeared first on Brew Distill Ferment.

The post Pure Distilling Gin Basket for Reflux Condenser 360mm appeared first on Brew Distill Ferment.

The post Pure Distilling Gin Basket for Pot Condenser140mm appeared first on Brew Distill Ferment.

The post Pure Distilling Extension M to F Thread 500mm appeared first on Brew Distill Ferment.

The post Pure Distilling Condenser Adaptor Male 2″ appeared first on Brew Distill Ferment.

The post Pure Distilling Condenser Adaptor Female 2″ appeared first on Brew Distill Ferment.

The lid also fits onto the following boilers:

• 35L Brewzilla Boiler
• 35L Digiboil
• Mangrove Jacks/Still Spirits Boiler
• Grainfather 30L Boilers
• 35L KegKing
• Any other boiler with a 310mm diameter

The post Pure Distilling Boiler Lid 60mm Hole appeared first on Brew Distill Ferment.